SHRK Stands

About Us

Engineered for Sim Racers Who Demand More

SHRK Stands was built by sim racing enthusiasts who got tired of compromising. We design and manufacture precision stand solutions optimized specifically for the Moza R3 direct drive wheel — combining rigorous engineering standards with transparent pricing so you can race with confidence, not regrets.

Browse Stands Get in Touch
SHRK Stands sim racing rig stand optimized for the Moza R3 direct drive wheel

Moza R3 Optimized

Every stand we produce is engineered around the Moza R3 mounting specs, torque requirements, and ergonomic positioning — no guesswork, no adapters.

Built to Last

We use high-grade materials and rigorous structural testing to ensure each stand handles intense sim sessions without flex, wobble, or fatigue over time.

Transparent Pricing

No hidden costs. What you see is what you pay — straightforward specs, honest pricing, and no upsells you didn't ask for.

Early SHRK Stands prototype sim racing rig stand built for Moza R3 wheel

Our Story

Built Out of Necessity. Refined by Passion.

SHRK Stands was born in a small workshop after our founder — a dedicated sim racer — grew frustrated with generic wheel stands that wobbled, flexed under load, and simply weren't designed for the Moza R3's direct drive torque demands. Off-the-shelf options were either overpriced or underdeveloped. The answer was to build something better.

What started as a personal project — a precisely engineered stand sized and reinforced for the Moza R3 — quickly caught attention in the sim racing community. Fellow racers wanted one. Then more. SHRK Stands became a focused operation dedicated entirely to producing the most stable, compatible, and honestly priced Moza R3 stand solutions on the market.

Every stand we ship reflects the same obsessive attention to detail that drove that first build: correct mounting geometry, rigid construction that handles full-force feedback without compromise, and transparent specifications so you know exactly what you're getting before you order.

Founded by Racers

SHRK Stands was started by sim racing enthusiasts who understand exactly what you need from your hardware — because we use it ourselves. Every design decision is informed by real seat time and honest feedback from the community.

Engineered for the Moza R3

We don't make universal stands and call them compatible. Our products are purpose-built around the Moza R3's mounting specs, torque profile, and physical footprint — delivering a fit that generic stands simply cannot match.

Mission & Values

At SHRK Stands, everything we build is guided by a core set of principles. These values shape every design decision, every weld, and every interaction we have with our customers.

Engineering Quality

Every SHRK stand is engineered with precision, not guesswork. We apply structural analysis and rigorous testing standards to ensure each unit delivers rock-solid stability during the most intense racing sessions. Flimsy construction has no place in a serious sim rig.

Transparency

We publish full material specifications, weight capacities, and dimensional data for every stand we sell — no hidden trade-offs. Pricing is clearly listed with no surprise fees. You know exactly what you're getting before you commit to a purchase, and we stand behind every claim we make.

Durability

SHRK stands are built to outlast the competition — literally. We use high-grade steel and reinforced mounting hardware rated well above the loads generated by direct drive wheel systems. Our stands don't flex, rattle, or degrade with long-term use. Built once, built right.

Moza R3 Compatibility

Every stand in the SHRK lineup is designed specifically around the Moza R3 direct drive wheel. Mounting points, cable routing channels, and clearance dimensions are verified against the actual hardware — not estimated. This dedicated focus means zero fitment guesswork and a setup that performs as intended from day one.

Why Sim Racers Choose SHRK Stands

We don't just build stands — we build confidence. Here's why serious Moza R3 owners trust SHRK Stands over generic alternatives.

Tested performance icon

Rigorously Tested Performance

Every SHRK stand is stress-tested under real sim racing conditions — sustained force feedback loads, lateral flex, and vibration cycles. You get published load ratings, not marketing promises. Our stands don't move when your wheel doesn't want them to.

Moza R3 optimization icon

Engineered for the Moza R3

SHRK stands are purpose-built around the Moza R3 direct drive wheelbase — not retrofitted from a generic design. Mount points, cable routing clearances, and vibration dampening geometry are all specified to the R3's exact footprint and torque output.

Transparent pricing icon

Honest, Transparent Pricing

No hidden fees, no inflated MSRP markdowns. Every SHRK stand is priced fairly based on material cost, fabrication time, and quality hardware. You see exactly what you're paying for — down to the hardware spec — before you add anything to your cart.

Expert technical guidance icon

Expert Technical Guidance

From pre-purchase compatibility questions to post-installation fine-tuning, our team provides real technical answers — not scripted support copy. We publish detailed installation guides and remain available 24/7 to help you get your rig dialed in correctly the first time.

Build durability icon

Built to Last, Not to Replace

SHRK stands are fabricated from structural-grade steel and finished with corrosion-resistant coatings rated for years of daily use. We don't cut corners on welds or fasteners. Our customers buy once and race indefinitely — that's the standard we build to.

Custom configurability icon

Configurable to Your Rig

Whether you're working within a tight desk setup or building out a dedicated sim room, SHRK stands are available in standard configurations and fully custom builds. Tell us your space constraints and wheel height preferences — we'll spec the right stand for your exact situation.

Browse Our Stands

What Sim Racers Are Saying

Real feedback from verified SHRK Stands customers — sim racers who demanded precision hardware and found exactly what they needed for their Moza R3 setup.

“I was skeptical about buying a stand online, but the SHRK R3 Base stand exceeded every expectation. Zero flex at the wheel, rock-solid under hard braking, and the Moza R3 mounted up perfectly on the first try. The engineering here is genuinely impressive for the price point.”

JM

James M.

Verified Buyer — SHRK R3 Base Stand

“Assembly took about 25 minutes following the installation guide — straightforward and well-documented. Everything lined up cleanly, and the stand hasn't shifted a millimeter through hundreds of hours of racing. Build quality is exactly what you'd expect from a purpose-built Moza R3 solution.”

SR

Sofia R.

Verified Buyer — SHRK R3 Pro Stand

“I requested a custom build to fit my desk setup, and the team was thorough in getting the dimensions right. The final stand handles my Moza R3 without any vibration transfer to the desk. Transparent pricing, honest lead times, and a product that delivered exactly as specced. Highly recommend.”

DK

Daniel K.

Verified Buyer — Custom Build

“After going through two cheap stands that wobbled under the Moza R3's direct drive torque, the SHRK stand was a completely different experience. It's built for this wheel specifically, and you can feel that in how tight everything sits. No more chasing a shifting rig mid-session.”

TC

Tom C.

Verified Buyer — SHRK R3 Base Stand

“The compatibility matrix on the installation page told me exactly what to expect before the stand even shipped. Mounting the Moza R3 took minutes, and the fit was perfect. SHRK Stands clearly did their homework on the hardware. This is what a purpose-built product feels like.”

AL

Anika L.

Verified Buyer — SHRK R3 Pro Stand

“I was comparing three different stands before landing on SHRK. What sold me was the straightforward specs and honest pricing — no hidden fees, no vague compatibility claims. The stand arrived well-packaged, assembled without issues, and has been solid through months of daily use with the Moza R3.”

MP

Marcus P.

Verified Buyer — SHRK R3 Base Stand

All reviews are from verified purchasers of SHRK Stands products. Testimonials reflect individual customer experiences with standard and custom Moza R3 stand builds.

Ready to Build Your Comfort?

Explore our full catalog of precision-engineered sim racing stands, optimized for the Moza R3 direct drive wheel. Whether you're after a ready-to-ship standard model or a fully custom configuration, SHRK Stands has the right solution for your rig.

Browse Stands Request a Custom Build
  • ✓ Standard models in stock and ready to ship — no waiting on custom fabrication timelines.
  • ✓ Every stand is engineered specifically for Moza R3 wheel compatibility and tested for stability.
  • ✓ Transparent, competitive pricing with no hidden fees — what you see is what you pay.
SHRK Stands

Build your comfort. Custom sim racing rig stands engineered for the Moza R3 direct drive wheel.

Navigation

Get in Touch

Available 24/7 for inquiries and support.

aerolddizon123@gmail.com

Phone: To be updated

Follow Us

© 2025 SHRK Stands. All rights reserved.